Solar

Enhance the aerodynamic performance and stability of your flat roof solar installation with the Esdec FlatFix Fusion Rear Wind Deflector (1700mm) in black. This component is crucial for managing wind loads within the FlatFix Fusion system, ensuring the integrity of your solar panel array.

• Improves system aerodynamics, potentially reducing required ballast.
• Provides a clean, finished look to the rear of FlatFix Fusion arrays.
• Clicks easily onto compatible FlatFix Fusion High Base units.

Why We Recommend This Product: It's an integral part of the FlatFix Fusion system's structural design, critical for managing wind forces and ensuring long-term stability on flat roofs.

Calculate precise ballast requirements and generate your full Esdec parts list, including deflectors, using the Enstall Calculator.

Provide essential aerodynamic protection and a clean finish to the right side of your Esdec FlatFix Fusion flat roof array with this Black Wind Deflector. Designed for systems using the 1077mm (or 1030mm) Base Profile, it complements the rear and left deflectors to enhance stability for your solar panels.

• Provides aerodynamic shielding for the right flank of the solar array.
• Creates a neat, enclosed appearance from the side.
• Clicks easily onto compatible FlatFix Fusion base units.

Why We Recommend This Product: It's a necessary component for managing wind forces on the sides of a FlatFix Fusion array where specified, crucial for stability and completing the perimeter shielding.

Ensure full aerodynamic protection. The Enstall Calculator for Esdec specifies all required deflectors (left, right, rear) based on your layout.

Increase the structural rigidity of your Esdec FlatFix Fusion solar installation on flat roofs with the Stabilizer 1700. This component connects base units together, enhancing the overall stability and load distribution for your solar panel array.

• Connects adjacent FlatFix Fusion base assemblies for added stiffness.
• Improves load distribution across the mounting system.
• Simple integration within the modular FlatFix Fusion framework.

Why We Recommend This Product: It provides essential extra stability, particularly for longer rows or specific configurations within the FlatFix Fusion system, ensuring structural integrity.

Use the Enstall Calculator for Esdec to determine if stabilizers are recommended for your specific project layout and roof conditions.

Securely fasten Esdec mounting components directly to sheet metal structures or purlins with this genuine Esdec Self-Tapping Screw (6.0 x 25mm). Its self-tapping design simplifies installation into metal, often used with components like the ClickFit Evo Corrugated Bracket, ensuring a strong fixing for your solar panel system.

• Self-tapping design for efficient fixing into sheet metal.
• Size 6.0 x 25mm, suitable for specific Esdec component attachments.
• Dual SW10 Hex / Torx T30 drive head for versatile tooling.

Why We Recommend This Product: Using the correct Esdec-specified self-tapping screw guarantees appropriate thread engagement and strength when fixing components to metal substructures, ensuring safety and warranty compliance.

Fastener specification is critical. The Enstall Calculator for Esdec determines the exact type and quantity of screws needed for your specific roof structure.

Safely isolate high-current AC circuits with the Garo SIAC4100IP65, a heavy-duty 100A 4-pole IP65 isolator switch.

• High Current AC Isolation: Rated for 100A (AC-22), perfect for main switch applications or large loads.
• Robust & Weatherproof: Durable IP65 enclosure protects against dust and water, suitable for demanding environments.
• Secure Lock-Off Capability: Features a padlockable handle in the 'OFF' position for maximum safety during maintenance.

The SIAC4100IP65 is our recommendation for robust, high-amperage AC isolation, ideal as a main switch disconnector for larger solar installations or industrial applications.

Safely isolate AC circuits with the compact Garo SIAC420IP65, a reliable 20A 4-pole IP65 weatherproof isolator switch.

• Dependable 20A Isolation: Provides safe switching for AC circuits up to 20A, suitable for lighting or smaller inverter outputs.
• Compact & Weatherproof: Features a space-saving design with an IP65 rated enclosure for dust and water protection.
• Secure Operation: Includes an interlocked, padlockable handle for safe maintenance lockout.

The SIAC420IP65 is an excellent choice for reliable, lower-current AC isolation, ideal for specific circuits, smaller solar inverters, or outdoor lighting controls.

Ensure safe AC circuit isolation with the Garo SIAC432IP65, a robust 32A 4-pole weatherproof isolator switch.

• Reliable AC Isolation: Safely disconnects AC circuits up to 32A, ideal for solar inverter AC output.
• Durable & Weatherproof: IP65 rating provides dust-tight and water-resistant protection for versatile installation.
• Secure Lock-Off: Handle is padlockable in the 'OFF' position for safe maintenance procedures.

We recommend the SIAC432IP65 for dependable AC isolation in residential or commercial settings, particularly for isolating solar PV inverters or other AC loads.

Dependably isolate AC circuits with the Garo SIAC463IP65, a robust 63A 4-pole isolator switch with an IP65 weatherproof rating.

• Reliable 63A Isolation: Safely switches AC circuits up to 63A, ideal for sub-mains or large solar inverter outputs.
• Durable Weatherproof Design: IP65 rated enclosure ensures protection against dust and water ingress.
• Enhanced Safety Lockout: Handle is padlockable in the 'OFF' position for secure maintenance.

The SIAC463IP65 is recommended for applications requiring reliable 63A AC isolation, such as larger residential, workshops, or light commercial loads.

Secure your solar PV setup with the Garo SIDC416IP65, a dependable 16A 4-pole DC isolator switch for essential safety isolation.

• Reliable DC Isolation: Provides safe switching for solar panel arrays, rated for 16A up to 1500V DC.
• Weatherproof Design: IP65 rated enclosure protects against dust and water, suitable for outdoor use.
• Safety Interlocked: Features an interlocked, padlockable handle for secure maintenance procedures.

Ideal for smaller residential solar installations, the SIDC416IP65 offers robust DC isolation compliant with UK standards.

Ensure the safety of your solar PV system with the Garo SIDC432IP65, a robust 32A 4-pole DC isolator designed for reliable performance.

• Safe DC Isolation: Provides essential safety switching for solar panel arrays up to 1500V DC.
• Durable & Weatherproof: Features an IP65 rating, ensuring protection against dust and water ingress for outdoor installations.
• Secure Operation: Interlocked handle, padlockable in the 'OFF' position for secure maintenance.

We recommend the SIDC432IP65 for residential and small commercial solar installations requiring dependable DC circuit isolation, offering peace of mind and compliance.

MC4 Crimping Tool (2.5–6.0mm²) is essential for safe, secure solar cable terminations. Designed for fast, clean crimps every time on standard MC4 connectors.

• Compatible with 2.5, 4.0 and 6.0mm² PV cable
• Creates professional, high-strength crimps on MC4 terminals
• Reliable ratchet action for even pressure

Why we recommend this product: Gives installers the right tool to ensure safe, consistent MC4 connections across solar jobs.

100mm² MC4 Connectors (1 Pair) are specialist high-capacity connectors for large-scale PV setups. Designed for reliability in high-current installations.

• Rated for up to 100mm² solar PV cable
• Secure locking mechanism prevents accidental disconnect
• Ideal for commercial PV, battery, and inverter connections

Why we recommend this product: A must-have for safe and stable termination on high-capacity solar systems.

Standard MC4 Connector Pair for 4–6mm² PV cable. Trusted for residential and small commercial solar installs. Secure, weatherproof and easy to terminate.

• One male and one female MC4 connector
• Supports 4–6mm² PV cable sizes
• UV and weather resistant for outdoor use

Why we recommend this product: The go-to connection solution for solar panel cabling on homes and small business installs.

Protect your solar investment with PestFix's 30m galvanised and PVC-coated bird guard. Designed to prevent nesting and debris buildup under solar panels.

• 30m reel ideal for large-scale solar arrays
• Galvanised and PVC-coated for durability
• Keeps pigeons and debris out from under panels

Why we recommend this product: A practical, long-lasting barrier that supports clean, uninterrupted solar performance.

Secure your solar bird guard mesh with PestFix universal clips. Designed to fasten 30mm mesh to solar panel frames without damaging the array.

• Quick snap-fit design for 30mm mesh
• Black finish for a discreet, clean look
• No drilling or frame damage required

Why we recommend this product: A reliable fix solution for long-term bird-proofing without altering your solar setup.