Solar Mounting Systems

Securely fasten components within your Esdec solar mounting system using this genuine Black M6 x 12mm Mounting Screw. Specified for use in particular connections, often within the FlatFix Fusion system for attaching clamps, ensuring the integrity and warranty compliance of your solar panel installation.

• Genuine Esdec fastener ensures correct fit and material compatibility.
• M6 thread, 12mm length - specified for certain component connections.
• Black finish for aesthetic consistency with black clamps and rails.

Why We Recommend This Product: Using the correct, manufacturer-specified fasteners like this M6 screw is critical for system safety, performance, and maintaining the Esdec warranty.

The Enstall Calculator for Esdec automatically generates a Bill of Materials including the precise quantity of required fasteners.

Secure the start and end solar panels in each row of your Esdec FlatFix Fusion installation with this standard finish End Clamp, designed for panels with a 30mm frame height. It provides a reliable grip, attaching to the Base Profile for a complete row assembly.

• Securely clamps start/end panels (30mm frame height) in FlatFix Fusion rows.
• Standard aluminium finish matches mill-finish profiles and bases.
• Ensures panels are held firmly at the array edges.

Why We Recommend This Product: It's the essential Esdec clamp for securing the edges of panel rows using 30mm frames within the FlatFix Fusion system, offering reliable performance and system compatibility.

Order the correct clamp size for your panels. The Enstall Calculator helps confirm component compatibility for your specific project.

This Esdec FlatFix Fusion Base Plate is utilised in specific scenarios where direct fixing or unique load distribution is required for a FlatFix Fusion installation. It connects to the system's base units via the separate Base Plate Bracket, providing a platform for anchoring your solar panel array.

• Provides a stable platform for specific fixing or load requirements.
• Used in conjunction with the FlatFix Fusion Base Plate Bracket.
• Applicable for hybrid (fixed & ballasted) or fully fixed system designs.

Why We Recommend This Product: It's the genuine Esdec component necessary for specific, engineered FlatFix Fusion configurations that require direct roof anchoring or specialised support via a base plate.

Note: Not typically required for standard ballasted systems. Use the Enstall Calculator or consult project engineering for specification.

Integrate the FlatFix Fusion Base Plate into your solar array using this purpose-designed Base Plate Bracket. It provides the secure connection between the base plate (used for specific fixing or support scenarios) and the main Low or High Base units of the FlatFix Fusion system.

• Securely connects the FlatFix Fusion Base Plate to system Base Units.
• Essential for configurations utilising the optional Base Plate.
• Maintains structural integrity within the modular system.

Why We Recommend This Product: It's the genuine Esdec component required to correctly and securely integrate the FlatFix Fusion Base Plate into the main mounting structure when needed.

Required only for specific configurations. The Enstall Calculator or Esdec manuals specify when Base Plates & Brackets are necessary.

Add the necessary weight securely to your non-penetrating Esdec FlatFix Fusion flat roof installation using the 1700 Ballast Container. Designed to hold standard ballast materials (like paving slabs), it integrates perfectly with the base units and profiles to stabilise your solar panel array against wind uplift.

• Securely contains ballast materials (e.g., concrete slabs).
• Integrates seamlessly with the FlatFix Fusion base structure.
• Essential for achieving the calculated weight for system stability.

Why We Recommend This Product: It's the official, purpose-designed solution for adding ballast to the FlatFix Fusion system, ensuring weight is placed correctly and securely.

Ballast calculation is critical. Use the Enstall Calculator for Esdec to determine the exact ballast requirements and container placements for your project.

Provide essential aerodynamic protection and a clean finish to the left side of your Esdec FlatFix Fusion flat roof array with this Black Wind Deflector. Compatible with systems using the 1077mm (or 1030mm) Base Profile, it works alongside rear and right deflectors to stabilise your solar panel installation against wind loads.

• Provides aerodynamic shielding for the left flank of the array.
• Creates a neat, enclosed aesthetic appearance.
• Clicks easily onto compatible FlatFix Fusion base units.

Why We Recommend This Product: It's a crucial component for managing wind forces on the sides of a FlatFix Fusion array, essential for overall system stability and completing the perimeter defence.

Ensure complete aerodynamic protection. The Enstall Calculator for Esdec specifies all required deflectors (left, right, rear) for your layout.

Ensure aerodynamic stability for Esdec FlatFix Fusion arrays utilising wider solar panels with this 1900mm Rear Wind Deflector. It attaches to the High Base units, managing wind uplift forces and contributing to the structural integrity of your flat roof installation.

• Manages wind loads on the rear edge of arrays, sized for wider panels (~1900mm width).
• Improves aerodynamic performance, potentially reducing ballast needs.
• Essential component for system stability calculations.

Why We Recommend This Product: It's the correctly sized rear deflector for FlatFix Fusion configurations using wider solar panels, crucial for ensuring aerodynamic stability and safety.

Use the Enstall Calculator for Esdec to determine the precise deflectors and ballast required based on your specific panels and site conditions.

Enhance the aerodynamic performance and stability of your flat roof solar installation with the Esdec FlatFix Fusion Rear Wind Deflector (1700mm) in black. This component is crucial for managing wind loads within the FlatFix Fusion system, ensuring the integrity of your solar panel array.

• Improves system aerodynamics, potentially reducing required ballast.
• Provides a clean, finished look to the rear of FlatFix Fusion arrays.
• Clicks easily onto compatible FlatFix Fusion High Base units.

Why We Recommend This Product: It's an integral part of the FlatFix Fusion system's structural design, critical for managing wind forces and ensuring long-term stability on flat roofs.

Calculate precise ballast requirements and generate your full Esdec parts list, including deflectors, using the Enstall Calculator.

Provide essential aerodynamic protection and a clean finish to the right side of your Esdec FlatFix Fusion flat roof array with this Black Wind Deflector. Designed for systems using the 1077mm (or 1030mm) Base Profile, it complements the rear and left deflectors to enhance stability for your solar panels.

• Provides aerodynamic shielding for the right flank of the solar array.
• Creates a neat, enclosed appearance from the side.
• Clicks easily onto compatible FlatFix Fusion base units.

Why We Recommend This Product: It's a necessary component for managing wind forces on the sides of a FlatFix Fusion array where specified, crucial for stability and completing the perimeter shielding.

Ensure full aerodynamic protection. The Enstall Calculator for Esdec specifies all required deflectors (left, right, rear) based on your layout.

Increase the structural rigidity of your Esdec FlatFix Fusion solar installation on flat roofs with the Stabilizer 1700. This component connects base units together, enhancing the overall stability and load distribution for your solar panel array.

• Connects adjacent FlatFix Fusion base assemblies for added stiffness.
• Improves load distribution across the mounting system.
• Simple integration within the modular FlatFix Fusion framework.

Why We Recommend This Product: It provides essential extra stability, particularly for longer rows or specific configurations within the FlatFix Fusion system, ensuring structural integrity.

Use the Enstall Calculator for Esdec to determine if stabilizers are recommended for your specific project layout and roof conditions.

Securely fasten Esdec mounting components directly to sheet metal structures or purlins with this genuine Esdec Self-Tapping Screw (6.0 x 25mm). Its self-tapping design simplifies installation into metal, often used with components like the ClickFit Evo Corrugated Bracket, ensuring a strong fixing for your solar panel system.

• Self-tapping design for efficient fixing into sheet metal.
• Size 6.0 x 25mm, suitable for specific Esdec component attachments.
• Dual SW10 Hex / Torx T30 drive head for versatile tooling.

Why We Recommend This Product: Using the correct Esdec-specified self-tapping screw guarantees appropriate thread engagement and strength when fixing components to metal substructures, ensuring safety and warranty compliance.

Fastener specification is critical. The Enstall Calculator for Esdec determines the exact type and quantity of screws needed for your specific roof structure.